Other Router Bit
Guitar Fretboard Radiusing 9 1/2" Radius Router Bit
Product Parameters
Description
A unique way to add a radius to your stringed instrument's fretboard. These radiusing bits will eliminate the excessive effort required for using a sanding block. Tape the finger board to a perfectly squared board and slide along the router table fence with the top of the bit's blade running at the height of the center line of the finger board. This will radius one half of the board. Then flip the stock to radius the other half. Fretboard radiusing router bits come in radiuses of 7-1/4", 8-1/2", 9-1/2", 10", 12" & 16".
Replicate the comfort and playability of a modern fender Stratocaster by adding a 9-1/2" radius to your guitar's fretboard using the radiusing router bit. This bit has a radiused cutting height of 1-7/8" for fretboards up to 3-3/4" wide. The bit features C3 premium micro grain carbide and 1/2" shank.
Bit Specs
Material:Carbide Tipped
Overall Length:3-15/16"
Largest Diameter:7/8"
Radius:9-1/2"
Number of Flutes:2
Number of Bits:1
Shank Size:1/2"
Cutting Length:2"
Cutting Depth:3/16"
