Other Router Bit
Cove Stacked Rail and Stile 1/2" Shank Router Bit
Product Parameters
Description
The Stacked Rail and Stile Router Bit will cut both the profile and cope for rail and stile cabinet doors with a single bit. Simply, cut the profiles with the middle and lower blades and then lower the bit in your table to make the cope cut using the middle and upper blades. No need to switch or reassemble cutters. This bit comes equipped with a radial ball bearing for easy cutting depth setup.
The Stacked Rail and Stile Router Bit will cut both rail and stile in a cove design. Simply cut the stile and then lower the bit in your table to make the rail cuts. No need to switch or reassemble cutters. Two flute carbide cutters with ball bearing guide. Shank is 1/2".
Bit Specs
Material:Carbide Tipped
Number of Bits:1
Minimum Stock Thickness:3/4"
Maximum Stock Thickness:15/16"
Shank Size:1/2"
Number of Flutes:2
Cutting Depth:3/8"
Overall Length:3-5/16"
Largest Diameter:1-5/8"
