3 1/2" Diameter Ogee Bead Raised Panel 1/2" Shank Router Bit

Product Parameters

Description

Use a raised panel router bit to reduce the thickness of the center panel of rail and stile doors while at the same time adding a beautiful profile to the edge. Install one of these bits in your table mounted router and route your panels face down. Raised panel router bits have a large diameter and remove a lot of material, so make sure you have a router with enough horsepower to handle this kind of work. All standard raised panel bits are fitted with radial bearings to make adjustment of the router table fence easy. Do not use these bits in handheld routers. If you are using stock that is very thick, choose one of our raised panel router bits with a backcutter blade. These will remove excess stock from the back of the panel as well.

The router bits panel raiser Router bit 12140 will make raised panels for cabinet doors in an elegant ogee & bead design. Use the panel raiser in conjunction with any one of our rail and stile router bits. Two flute carbide cutters & 1/2" shank.

Bit Specs
Material:Carbide Tipped
Number of Flutes:2
Shank Size:1/2"
Cutting Length:9/16"
Largest Diameter:3-1/2"
Cutting Depth:1-1/2"
Overall Length:2-1/2"
Number of Bits:1